IMPORTANT NOTE: Please ensure that you choose the correct size for your replacement watch strap prior to ordering. This can be established simply by measuring the distance (in millimeters) between the lugs of your watch. This width will be the size of the watch strap you should order. An example can be seen on the strap measuring page.

  • Ballistic textured silicon waterproof strap (various colours)

    18 / 20 / 22 / 24mm £15.45
    Colour:

    Sizes(mm):

    Pair spring bars
    (1.5mm thick)

    18mm (£1)
    20mm (£1)
    22mm (£1)
    24mm (£1)

    Spring Bar Removal Tool
    (£8.95)


    textured silicon waterproof watch strap in various colours and contrast stitching Hover to zoom / Click to enlarge

    A flexible silicon waterproof strap with a textured surface finish on top and 'square blocked print' on the underside, fitted with a stainless steel buckle

    Available with various stitched finishes.

    All straps taper by 2mm from lug to buckle; 24 > 22mm, 22 > 20mm etc.

    'Hole' side is 118mm long and buckle side is 84mm (excluding buckle).

    Approx 3mm thick throughout entire length of strap.

    Comes in four sizes: 18/20/22/24mm

    Colours available include;

    • Orange
    • Red
    • Black with white stitch
    • Black with blue stitch
    • Black with yellow stitch
    • Black with red stitch
    • Black with orange stitch

    A flexible silicon waterproof strap with a textured surface finish on top and 'square blocked print' on the underside, fitted with a stainless steel buckle

    Available with various stitched finishes.

    All straps taper by 2mm from lug to buckle; 24 > 22mm, 22 > 20mm etc.

    'Hole' side is 118mm long and buckle side is 84mm (excluding buckle).

    Approx 3mm thick throughout entire length of strap.

    Comes in four sizes: 18/20/22/24mm

    Colours available include;

    • Orange
    • Red
    • Black with white stitch
    • Black with blue stitch
    • Black with yellow stitch
    • Black with red stitch
    • Black with orange stitch

  • Black ZRC silicon rubber waterproof strap

    18 / 20 / 22 / 24mm £12.99
    Size (mm)

    Pair spring bars
    (1.5mm thick)

    18mm (£1)
    20mm (£1)
    22mm (£1)
    24mm (£1)

    Spring Bar Removal Tool
    (£8.95)


    Black silicon waterproof watch strap Hover to zoom / Click to enlarge

    A soft, supple silicon replacement watch strap from the well known watch band manufacturer ZRC

    It has a thickness of 5mm at the lug end going down to 3mm with a parallel indents down both sides of the strap whilst the buckle is brushed steel.

    The strap tapers by 2mm from lug to buckle end

    The ‘holepart’ measures 128mm long and 75mm for the buckle part (excluding buckle).

    Available in black only

  • Silicon rubber waterproof plain strap (various colours)

    18 / 20 / 22 / 24mm £9.95
    Colour:

    Size:           


    Pair spring bars
    (1.5mm thick)

    18mm (£1)
    20mm (£1)
    22mm (£1)
    24mm (£1)

    Spring Bar Removal Tool
    (£8.95)


    rubber waterproof plain strap in various colours Hover to zoom / Click to enlarge

    Lightweight, high quality, soft rubber watch strap measuring 4mm at shoulders down to 3mm at buckle.

    Supplied complete with a stainless steel buckle.

    Available in 18/20/22/24mm sizes.

    All straps taper by 2mm; 24 > 22mm, 22 > 20mm, 20 > 18mm, 18 > 16mm.

    Lug and buckle sizes printed on underside of strap.

    'Hole' side is 119mm long and buckle side is 79mm (excluding buckle).

    Colours available include;

    • Red
    • White
    • Pastel Blue
    • Yellow
    • Pink
  • Silicon rubber waterproof striped strap

    20 / 22 / 24mm £9.95
    Colour:

    Size(mm):   

    Pair spring bars
    (1.5mm thick)

    20mm (£1)
    22mm (£1)
    24mm (£1)

    Spring Bar Removal Tool
    (£8.95)


    rubber waterproof striped strap in red, black and blue Hover to zoom / Click to enlarge

    Lightweight, high quality, soft rubber strap measuring 4mm at shoulders down to 3mm at buckle. Supplied complete with a stainless steel buckle.

    Strap has a single striped 'indent' going through its centre.

    Available in 20/22/24mm sizes.

    All straps taper by 2mm; 24 > 22mm, 22 > 20mm, 20 > 18mm.

    Lug and buckle sizes printed on underside of strap.

    'Hole' side is 119mm long and buckle side is 79mm (excluding buckle).

    Colours available include;

    • Red
    • Black
    • Sibnal Blue
  • Black Silicon rubber 20mm striped strap

    20mm only £11.95
    Pair spring bars
    (1.5mm thick)

    20mm (£1)

    Spring Bar Removal Tool
    (£8.95)


    Black silicon rubber striped strap with deployant clasp Hover to zoom / Click to enlarge

    Soft, good quality and thick construction measuring 4mm at shoulders down to 3mm at buckle.

    Supplied complete with a stainless steel spring bar release clasp.

    Approximately 190mm long with clasp closed.

    20mm black only.

  • Black silicon rubber 20mm tyre tread pattern

    20mm only £11.95
    Pair spring bars
    (1.5mm thick)

    20mm (£1)

    Spring Bar Removal Tool
    (£8.95)


    Black silicon rubber tyre tread strap with deployant clasp Hover to zoom / Click to enlarge

    Another new good quality strap with thick construction measuring 3mm.

    Supplied complete with a stainless steel spring bar release clasp.

    Approximately 190mm long with clasp closed.

    20mm black only.

  • Black silicon rubber two-piece 20mm strap

    20mm only £8.00
    Pair spring bars
    (1.5mm thick)

    20mm (£1)

    Spring Bar Removal Tool
    (£8.95)


    Black silicon rubber chunky two-piece watch strap Hover to zoom / Click to enlarge

    Another new good quality two-piece "chunky" strap with a consistent thickness of 3mm yet still soft and flexible.

    Strap comes fitted with stainless steel buckle.

    'Hole side' measures 125mm long whilst buckle side measures 85mm (excluding buckle).

    20mm black only.

  • Rubber diver strap on stainless steel deployant clasp

    18 / 20 / 22mm £10.50
    Colour:     

    Size(mm):

    Pair spring bars
    (1.5mm thick)

    18mm (£1)
    20mm (£1)
    22mm (£1)

    Spring Bar Removal Tool
    (£8.95)


    rubber divers watch strap with deployant clasp in black and blue Hover to zoom / Click to enlarge

    Soft, supple rubber diver strap with an oyster pattern moulded into the top. The strap itself is solid with the design being moulded into the top of the design only.

    Supplied complete with a stainless steel spring bar release clasp.

    Straps taper down by 2mm: 22>20mm ; 18>16mm.

    Approximately 195mm long with clasp closed.

    Available in Black, Blue.

  • 'Diamond' rubber strap on stainless steel deployant clasp

    20 / 22mm £11.95
    Colour:     

    Size(mm):

    Pair spring bars
    (1.5mm thick)

    20mm (£1)
    22mm (£1)

    Spring Bar Removal Tool
    (£8.95)


    Black and blue rubber divers watch strap with deployant clasp Hover to zoom / Click to enlarge

    A soft rubber strap. The high quality, silicon based divers strap ensures maximum comfort against the skin when worn. A plain outer and diamond 'cross-cross' inner pattern runs lengthways along the strap

    It comes fitted with a stainless steel deployant clasp and safety lock.

    Approximately 190mm long with clasp closed.

    Available in Black, Blue.

  • 22mm Black Seiko style resin divers strap

    22mm only £6.50
    Pair spring bars
    (1.5mm thick)

    22mm (£1)

    Spring Bar Removal Tool
    (£8.95)


    22mm Seiko style divers watch strap with stainless steel buckle Hover to zoom / Click to enlarge

    Resin Seiko type replacement strap with stainless steel fittings.

    This is a heavy but very good quality waterproof strap.

    'Hole side' measures 127mm long whilst buckle side measures 80mm (excluding buckle).

  • 24mm Black Seiko style resin divers strap

    24mm only £7.50

    Pair spring bars
    (1.5mm thick)

    24mm (£1)

    Spring Bar Removal Tool
    (£8.95)




    24mm Seiko style divers watch strap with stainless steel buckle Hover to zoom / Click to enlarge

    Resin Seiko type replacement strap with stainless steel fittings.

    This is a heavy but very good quality waterproof strap.

    'Hole side' measures 140mm long whilst buckle side measures 85mm (excluding buckle).

  • Black Casio style resin strap

    18 / 20mm £4.50 / 5.00
    Size(mm):

    Pair spring bars
    (1.5mm thick)

    18mm (£1)
    20mm (£1)

    Spring Bar Removal Tool
    (£8.95)


    Casio style divers watch strap with stainless steel buckle Hover to zoom / Click to enlarge

    Resin waterproof Casio type replacement strap with stainless steel fittings.

    'Hole side' measures 122mm long whilst buckle side measures 75mm (excluding buckle).